SePem 351
Classification:
Order Number:
078
Product model:
- Host Capability
-
- Commodity name: SePem 351
- Commodity ID: 078
The SePem® 351 noise logger monitors your water distribution networks. With the target of reducing water losses, it transfers measurement data via LoRaWAN®.
Sending measurement data via LoRaWAN®
The SePem® 351 noise logger monitors your water distribution networks.
With the target of reducing water losses, it transfers measurement data via LoRaWAN®.
The SePem® 351 logger is specifically designed for stationary installation. It measures the noises in the pipe network at defined times. Following the measurement, the recorded data are evaluated and prepared to be transferred.
The logger must be registered in a LoRaWAN® network to ensure that the measurement data can subsequently be sent to the control board of a water utility. A network information system is required to visualise the results.New leaks that occur can be detected within a few hours as the measurement values are transferred daily by every SePem® 351. The use of existing LoRaWAN® networks enables the optimum connection to implemented technologies.
SePem® 351 is designed for use in distribution networks.
The product variant SePem® 351 HY is used to monitor trunk mains acoustically.
We will be happy to support you with the integration of the SePem® 351 into installed network information systems.
LoRaWAN® is a brand used under the LoRa Alliance® licence.
Purchase Consultation
Other Products
Cover locator M 130
The M 130 valve box locator detects at depth and is not sensitive to surface metals, moisture or fluctuations in temperature. One button operation makes it easier to use the device;
SeFlow 400
The SeFlow 400 is Sewerin’s single channel portable flowmeter for applications in the municipal water and wastewater sector offering long term stable and precise bidirectional flow measurements in remote areas outdoor.
FerroTec FT 10
The FerroTec FT 10 helps you safely and reliably locate concealed shaft covers, sliding rods and caps, as well as pavement markers and other objects. The only requirement is that they are made of iron, cast iron or steel. The ergonomic design, convenient operation and precise measuring technology make your work fast and easy.
VARIOTEC 460 Tracergas
The VARIOTEC® 460 Tracergas was developed especially for leak detection on underground pipes by using tracer gas. It is characterised by an outstanding price to performance ratio.
Glass fibre probe system
Non-metal pipes can be detected if the glass fibre rod can be inserted into the pipe in question. The rod is equipped with a copper strand so that it can be energized by a pipeline locating system such as FERROPHON® or UtiliTrac® using a generator and then detected using a receiver. In this way, the path of the pipe in question can be determined quickly and exactly to the last meter.
System Combiphon
Plastic pipes cannot be located by conventional electromagnetic means because they are not electroconductive. A different principle is applied when locating pipes using the acoustic method: The pipes transmit mechanical vibrations better than the earth that surrounds them.
Headquarters
Operator:010-5780 7006
Fax: 010-5780 7007
Email:info@polytide-bj.com
After-sales service
After-sales service:010-5608 1888
After sales complaints：complain@polytide-bj.com
Pay attention to our WeChat service number and contact us directly.
Focus on us
Follow Polytide
Get more updates
