Automatic Test Sets ATS 503/501
Classification:
Order Number:
a1111
Product model:
- Host Capability
-
- Commodity name: Automatic Test Sets ATS 503/501
- Commodity ID: a1111
The test sets ATS 503 and ATS 501 can be used to carry out device inspections and adjustments to gas concentration measuring devices EX-TEC® PM 580, 550, 500 and 400 reliably and extremely efficiently.
The test sets ATS 503 and ATS 501 can be used to carry out device inspections and adjustments to gas concentration measuring devices EX-TEC® PM 580, 550, 500 and 400 reliably and extremely efficiently.
The ATS test set can be operated in three modes:
If the test set is operated in Automatic operating mode, all the device inspections that are due will be performed automatically as soon as a device is inserted into the test set that is switched on. Only the device condition subtest must be completed manually by the user. If the Timer operating mode is selected, the device inspections start at a freely adjustable time.
If a measuring device fails the device inspection, adjustment can also be carried out automatically from the test set in these two operating modes.
In the Manual operating mode, the user starts the device inspection by pressing the key. The device inspection can be performed in two variants for the gas warning range: using a test gas and time-saving bump test or with an indication accuracy test.Because the rechargeable batteries for the measuring devices are automatically charged in the test set, a device that stays in an ATS in the Timer operating mode overnight is ready for use within a very short time the next morning.
All the device inspections performed by the test set are stored as protocols both in the test set and in the device, making it easy to understand.
Purchase Consultation
Other Products
Cover locator M 130
The M 130 valve box locator detects at depth and is not sensitive to surface metals, moisture or fluctuations in temperature. One button operation makes it easier to use the device;
SeFlow 400
The SeFlow 400 is Sewerin’s single channel portable flowmeter for applications in the municipal water and wastewater sector offering long term stable and precise bidirectional flow measurements in remote areas outdoor.
FerroTec FT 10
The FerroTec FT 10 helps you safely and reliably locate concealed shaft covers, sliding rods and caps, as well as pavement markers and other objects. The only requirement is that they are made of iron, cast iron or steel. The ergonomic design, convenient operation and precise measuring technology make your work fast and easy.
VARIOTEC 460 Tracergas
The VARIOTEC® 460 Tracergas was developed especially for leak detection on underground pipes by using tracer gas. It is characterised by an outstanding price to performance ratio.
Glass fibre probe system
Non-metal pipes can be detected if the glass fibre rod can be inserted into the pipe in question. The rod is equipped with a copper strand so that it can be energized by a pipeline locating system such as FERROPHON® or UtiliTrac® using a generator and then detected using a receiver. In this way, the path of the pipe in question can be determined quickly and exactly to the last meter.
System Combiphon
Plastic pipes cannot be located by conventional electromagnetic means because they are not electroconductive. A different principle is applied when locating pipes using the acoustic method: The pipes transmit mechanical vibrations better than the earth that surrounds them.
Headquarters
Operator:010-5780 7006
Fax: 010-5780 7007
Email:info@polytide-bj.com
After-sales service
After-sales service:010-5608 1888
After sales complaints：complain@polytide-bj.com
Pay attention to our WeChat service number and contact us directly.
Focus on us
Follow Polytide
Get more updates
